220 Pcs Heat Shrink Sold. Set 0.25-6Mm2 YT-81460 YATO

The YATO heat shrink solder sleeves set YT-81460 is designed for creating permanent, waterproof connections of electrical cables.

• Contains transparent heat shrink tubing with a tin ring in the center and two thermal glue rings on each side for enhanced sealing.
• Suitable for wires with cross-sections of 0.25-6 mm² or 24-10 AWG.
• Tubing lengths of 27 - 40 mm.
• Internal diameter options ranging from 1.7 - 6 mm.
• Melt temperature of solder binder: 105°C.
• Shrink temperature: 80°C.
• Includes a total of 220 pieces, conveniently packaged in an organizer.

PE vs PVC and Other Differences:

YATO's heat shrink solder sleeves are crafted from polyethylene (PE), ensuring the right amount of solder binder and the inclusion of hot glue rings. The benefits of PE over PVC include:

• Higher shrink ratio: PE at 3:1 compared to PVC's 2:1, allowing for better wrapping of cables and easier application with larger diameters.
• Retains flexibility in sub-zero temperatures, while PVC becomes rigid and prone to cracking.
• Greater resistance to abrasion, punctures, and chemicals.

This versatile product performs well for both domestic use and in environments subjected to harsh conditions, like cold climates or proximity to high temperatures (e.g., in vehicles or near engines).

The adequate amount of solder binder allows for robust and reliable solder joints, enhancing long-lasting connectivity. Cheaper alternatives may lack sufficient tin content, especially for larger cross-sections, potentially compromising longevity and reliability.

Finally, the sealing adhesive used in YATO products is a specially formulated hot glue known for its durability and elasticity. This glue remains effective over time, avoiding crumbling, unlike some lower-quality options that use EVA plastic, which degrades when exposed to environmental factors.

• Series: GRD
• Shrink material: EP
• Solder material: tin
• Color options: white (x40), red (x80), blue (x80), yellow (x20)
• Lengths: 27 mm and 40 mm
• Internal diameters: 1.7 mm, 2.7 mm, 4.5 mm, 6 mm
• Cross-sectional area: 0.25-6 mm² / 24~10 AWG
• Melting point: 105 ˚C
• Shrink temperature: 80 ˚C
• Application: for the permanent and waterproof connection of electrical cables