Lodāmurs 60W, spics uzgalis, STHOR

The STHOR 79367 soldering iron is an efficient and practical tool for hobbyists and DIY enthusiasts. Designed with a traditional housing and powered directly from a wall outlet, this soldering iron ensures reliable performance for various soldering tasks.

This soldering iron features a powerful 60W heater that heats up to a maximum temperature of 400 °C within just 5-10 minutes, making it suitable for soldering copper wires and basic electronics using through-hole assembly technology. The simple design contributes to its longevity and low failure rate, provided the soldering tip is maintained properly.

• Power supply: 230V
• Heater power: 60W
• Depth of arrowhead hole: approximately 60 mm
• Maximum diameter of arrowhead: 6.0 mm

Dimensions of the soldering iron:

• Length: approximately 70 mm
• Diameter: 5.7 mm
• Tip diameter: 1.0 mm

Other dimensions:

• Total length with bent cable: 250 mm
• Handle length: approximately 120 mm
• Power cord length: 140 cm

Heating time: It takes about 3 minutes to heat up to 350 °C.

Care for the soldering iron tip:

The tips of STHOR soldering irons are coated with a special material that helps reduce oxidation. To maintain the protective layer, it is essential to avoid prolonged heating and mechanical damage. When first warming up the soldering iron, apply a small amount of solder to the tip and remove any excess, perhaps using brass shavings. This will create a protective tin layer against oxidation. It is advisable to tin the tip every time you finish a job to maximize its lifespan.

Important note:

Always use a grounded outlet when operating the soldering iron to prevent electric shock hazards. All STHOR soldering irons come with a grounded plug that is connected to the metal housing.

The STHOR 79367 soldering iron is perfect for amateur work and projects.

• Series: GRD
• Power: 60 W
• Voltage: 230 V a.c.
• Frequency: 50 Hz
• Max. temperature of soldering tip: 400 °C
• Heating time: 5-10 min
• Soldering tip dimensions: Ø6x65 mm
• Wire length: 1.3 m
• Wire section area: 3Gx0.5 mm²
• Wire insulation type: H03VV-F
• Electric insulation class: I
• Weight: 0.18 kg