10 Pcs. Drill Guage & Depth Stop Set YT-44095 YATO

The YATO YT-44095 Drill Gauge and Depth Stop Set is a comprehensive kit designed for precise measurement of hole diameters and depth control when using twist drills.

This set consists of two steel plates used for diameter inspection, each measuring approximately 150 x 80 mm x 1 mm.

• Metric plate sizes: 1, 1.5, 2, 2.5, 3, 3.2, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.2, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13 mm
• Inch plate sizes: 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64”, 3/16”, 13/64”, 7/32”, 15/64”, 1/4”, 17/64”, 9/32”, 19/64”, 5/16”, 21/64”, 11/32”, 23/64”, 3/8”, 25/64”, 13/32”, 27/64”

This set also includes seven drill depth stops made of turned steel with a locking screw for sizes 3, 4, 5, 6, 8, 10, and 12 mm, along with a 1.5 mm hex key for locking the stops. The gauges are ideal for a quick initial check of external diameters, such as drills, shafts, rods, and wires.

The ring-shaped drill depth stops, when placed on the drill bit, provide exact control over the depth of the drilled hole. The stops are designed to be locked onto the drill, allowing for a pre-determined drilling depth. Checking the diameter of a test piece (for example, a nail, rod, or shaft) is easy by placing it in the respective hole with minimal clearance. The diameters are clearly indicated on the plates next to the openings.

• Series: GRD
• Dimensions: 150x80x1 mm
• Diameter: 1/16"-1/2" / 1.0-13 mm
• Material: Steel
• Set Includes: 10 pieces
• Application: Hole diameter control, for mounting on twist drills to obtain the desired hole depth.